506 found, showing page 31 of 34
M4-0.70 x 30 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 30 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 35 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 35 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 40 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 40 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 45 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 45 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 50 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 50 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 60 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 60 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 70 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 70 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M5-0.80 x 10 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M5-0.80
- Length: 10 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M5-0.80 x 16 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M5-0.80
- Length: 16 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M5-0.80 x 20 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M5-0.80
- Length: 20 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M5-0.80 x 25 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M5-0.80
- Length: 25 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M5-0.80 x 30 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M5-0.80
- Length: 30 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M6-1.00 x 12 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M6-1.00
- Length: 12 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M6-1.00 x 16 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M6-1.00
- Length: 16 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M6-1.00 x 20 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M6-1.00
- Length: 20 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
